Midi To Roland Fantom XR

Die beiden Spitzenmodelle der Prä-SEMPRA Generation, bis 2017
Antworten
Keith
Beiträge: 2
Registriert: 04.04.2015, 09:27

Midi To Roland Fantom XR

Beitrag von Keith »

For over ten years I have owned a Roland Fantom XR loaded with the Theatre Organ In A Box samples from the Blackpool Tower Wurlitzer. I would like to connect this to my Bohm Sinfonia so that I can use the Sinfonia to control the Fantom.
I do not have a full manual for the Bohm so have nothing to refer to. I need to be able to create a preset to send the following midi information. MSB 85, LSB 32, Program Number 1 using Midi Channel 16. If it is not possible to send the information on Midi Channel 16 I need to know which Midi Channel is used by default.

Any help would be appreciated.

Cheers,

Keith

Benutzeravatar
Claus Riepe
Site Admin
Beiträge: 4186
Registriert: 29.08.2006, 13:58

Re: Midi To Roland Fantom XR

Beitrag von Claus Riepe »

Hi Keith!

It's no problem. The best way is to do the MIDI connection via the sound presets. So you could integrate all the single sounds to the organ's panel (soundlists, etc.). Is only channel 16 possible? Think the Roland should be able to receive in multi mode on all channels.

Regards,

Claus
digital:
SEMPRA SE100 / SE10DB
Overture stage
analog:
Böhm Professional 2000
Böhm DnT - Original Ady Zehnpfennig
Böhm CnT/L

Antworten